Narrow By
20 Products
HDW Hygienic Enclosures
Eldon’s Hygienic Design wall mounted enclosures are designed for customers in the food & beverage and pharmaceutical industries, as well as operations in other sanitary environments requiring high cleanliness. The fundamental reason for choosing Hygienic Design is the prevention of product contamination. These enclosures feature a high degree of protection, adhere to strict health and safety standards, and are easily sanitized.
- Complies with hygiene standards EN 1672-2 and ISO 14159, directive on machinery 2006/42/EU, and hygienic design guideline EHEDG13
- High temperature and water clearing - UL Type 4X, IP66 and IP69 certified per IEC60529, IP69K certified per ISO 20653
- IK08 impact resistance
- One-piece gasket is made from FDA-approved blue silicone, is easy to clean or replace, and provides a gapless seal.
- Concealed door hinges inside enclosure avoid accumulation spots
CONSTRUCTED FOR HEALTH & SAFETY
General Features
2mm-thick Galvanized Steel Mounting Plate
Easy-to-Clean / Replace Blue Silicone Gasket
Grounding Studs Inside Enclosure
Protection Against Large Residues
- 30° sloped roof ensures self-draining
- 30mm roof overhang
- Self-draining hygienic lock
Protection Against Small Residues
- 8° sloped door edge
- Gapless seal
- Smooth stainless-steel finish
WHAT ARE THE ADVANTAGES OF THE HDW LINE?
Eldon HDW enclosures are constructed with carefully selected materials to ensure highly sanitary operation and ease of thorough cleaning. Hygiene risks are minimized through self-draining, smooth-finished surfaces, and a gap-free design. Cleaning time is reduced through both the easy-to-clean design and the ability to use high pressure and high temperature water without worrying about water and dust entering the enclosure.
Additional advantages include (but are not limited to):
- No pre-drilled mounting holes or gland plates where bacteria can accumulate
- Door able to be reversed without the need for machining
- Available in eight standard sizes off-the-shelf
- Thorough cleaning is fast and easy
- Increased life expectancy of protected equipment
- Compelling hygienic visual presentation
HDW ACCESSORIES
Wall Mounting Brackets
HD Wall Mounting Brackets are made according to hygienic design requirements of EN 1672-2:2009. The body is made of stainless steel with FDA 21 CFR 177.2600-compliant blue silicone washers. Wall mounting brackets permit the HDW enclosure to be mounted on a vertical wall and provide a space between the wall and the enclosure to facilitate cleaning. These brackets feature a round cross-section and are self-draining.
HD Wall Mounting Brackets are made according to hygienic design requirements of EN 1672-2:2009. The body is made of stainless steel with FDA 21 CFR 177.2600-compliant blue silicone washers. Wall mounting brackets permit the HDW enclosure to be mounted on a vertical wall and provide a space between the wall and the enclosure to facilitate cleaning. These brackets feature a round cross-section and are self-draining.
Leveling Feet
Leveling feet enable the HDW enclosures to be floor-mounted. These leveling feet are hygienic-designed and certified according to the 3A hygienic standard “88-00” as well as EHEDG standard TYPE EL – CLASS 1. Slopes up to 10° are admitted with use of the leveling feet.
Leveling feet enable the HDW enclosures to be floor-mounted. These leveling feet are hygienic-designed and certified according to the 3A hygienic standard “88-00” as well as EHEDG standard TYPE EL – CLASS 1. Slopes up to 10° are admitted with use of the leveling feet.
DIMENSIONS
MATERIALS & CONSTRUCTION
The Eldon HDW series enclosures are designed with materials selected for highly sanitary operation and ease of cleaning.
Body
Monoblock AISI 304 pre-grained stainless-steel body, folded and seam welded. The top of the body is equipped with a forward-sloping roof and a 30 mm overhang to avoid any draining liquids from dripping onto the gasket and the door.
Door
2mm AISI 304 pre-grained stainless-steel door. The door is surface mounted with 120° opening. Concealed hinges with captive pin. Can be swapped between left and right hand opening without use of a machine.
Internal Hinge
Internal door hinge avoids accumulation of dirt deposits.
Gasket
Sealing is ensured by a one-piece removable blue silicone gasket. The silicone is FDA 21 CFR 177.2600 compliant.
Lock
Hygienic design lock made of AISI 316L stainless steel with blue silicone gasket. The lock conforms with DIN EN 1672-2:2009.
Mounting Plate
A 2mm galvanized steel mounting plate fixed onto M8 studs welded on the rear of the enclosure. All sides from 800 mm and above are strengthened by folded edges. The mounting plate is marked vertically at 10 mm intervals for easy horizontal positioning of equipment.
Cable Access
To avoid hygiene risks, there are no standard gland openings.
Protection Rating
Corresponds with IP 66/69/69K | TYPE 4X, 12, 13 | IK08.
Approvals: CE
Finish
400 pre-grained stainless steel polished to Ra < 0.8μm.
WHERE ARE HYGIENIC ENCLOSURES USED?
Hygienic Enclosures are ideal for environments that are required to or strive to maintain hygiene standards. The Eldon HDW enclosures are ideal for any application needing an enclosure that minimizes the build-up of dirt, eliminates the chances of dirt and water entering the enclosure space, and enables easy and thorough cleaning. Some examples include:
Hygienic Enclosures are ideal for environments that are required to or strive to maintain hygiene standards. The Eldon HDW enclosures are ideal for any application needing an enclosure that minimizes the build-up of dirt, eliminates the chances of dirt and water entering the enclosure space, and enables easy and thorough cleaning. Some examples include:
- Canning and Bottling
- Meat Packing
- Primary and Secondary Food Processing
- Pharmaceutical Processing Facilities
- Petrochemical Plants
- Wastewater Treatment Facilities
WHO USES HYGIENIC ENCLOSURES?
Eldon HDW enclosures are the answer for industries seeking washdown enclosures that maintain high standards of sanitation. Some major industries that make use of these hygienic enclosures include:
Eldon HDW enclosures are the answer for industries seeking washdown enclosures that maintain high standards of sanitation. Some major industries that make use of these hygienic enclosures include:
- Food & Beverage
- Pharmaceutical
- Petrochemical
- Wastewater
Item
Item Details
Price
QTY
Stock Status
Add To Cart
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 17 x 9 x 6" (442 x 220 x 155mm - HxWxD), Subpanel Included
$614.70
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 22 x 15 x 8" (552 x 390 x 210mm - HxWxD), Subpanel Included
$900.00
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 24 x 24 x 12" (605 x 610 x 300mm - HxWxD), Subpanel Included
$1,174.50
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 26 x 20 x 8" (672 x 510 x 210mm - HxWxD), Subpanel Included
$955.80
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 30 x 15 x 8" (772 x 390 x 210mm - HxWxD), Subpanel Included
$1,158.30
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 30 x 24 x 8" (772 x 610 x 210mm - HxWxD), Subpanel Included
$1,174.50
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 48 x 32 x 12" (1225 x 810 x 300mm - HxWxD), Subpanel Included
Must Ship LTL Truck Freight$2,181.60
Eldon Enclosure, Hygienic Design HDW Series, 304 Stainless Steel, Single Door, Wall mount HD, Type 4X & 12, 56 x 32 x 12" (1425 x 810 x 300mm - HxWxD), Subpanel Included
Must Ship LTL Truck Freight$2,371.50
Eldon Wallmounting Bracket for HDW Series Enclosures, 1 Bracket, 50mm depth, Stainless Steel
$65.00
Eldon Wallmounting Bracket for HDW Series Enclosures, 1 Bracket, 300mm depth, Stainless Steel
$87.00
