SG2-20VT-D, SG2 PLR, 8 DC IN, 4 Analog IN, 8 Transistor OUT, Built-in MODBUS RTU I/O Link
TECO SG2 Series PLR V.3, 8 DC Inputs, 4 Analog Inputs, 8 Transistor Outputs, Built-in MODBUS RTU I/O Link
Item: SG2-20VT-D
$162.00
Quantity Pricing
1+
$162.00
10+
$158.76
20+
$153.90
50+
$149.85
SKU: SG2-20VT-D
Weight: 0.8 lbs.
Made in: China
Specifications
TECO SG2 Series PLR V.3, 8 DC Inputs, 4 Analog Inputs, 8 Transistor Outputs, Built-in MODBUS RTU I/O Link
- 24V / 3.2mA DC Inputs
- Analog Inputs, 10-bit, 0-10VDC
- 4 line, 16 character LCD backlit display
- 8 Programming Keys
- Retentive Flash Memory
- Multi-language support
- Built-in Real-Time Clock
- Agency Approvals: UL / cUL / CE
- 1 Year Warranty
General Specifications
General Specicfications | |
Input Power Voltage Range | 20.4-28.8V |
Power Consumption | 20-point: 150mA |
Wire Size (All Terminals) | 26 to 14 AWG |
Programming | |
Programming Languages | Ladder/Function Block |
Program Memory | 300 Lines or 260 Function Blocks |
Programming Storage Media | Flash |
Execution Speed | 10ms/cycle |
Customizable Screens | 31 (H Coils) |
LCD Display | 4 Lines x 16 Characters |
Function Keys | 8, 4 User-defined (Z Inputs) |
Auxiliary Coils | 126 (63 M-coils, 63 N-coils) |
Timers | 31 T-coils |
Timing Ranges | 0.01s–9999min |
Counters | 31 C-coils |
Highest Count | 999999 |
RTC (Real Time Clock) | 31 R-coils |
Resolution | 1 min |
Time Span Available | Week, Year, Month, Day, Hour, Min |
Daylight Savings Feature | Yes |
Power Off RTC Retention | 240 Hours |
Compare Instructions (Analog, Timer, or Counter Values) | 31 G-coils |
Compare Functions | EQ, LT, GT, LE, GE, NE |
PID Control (Proportional-Integral-Derivative) | 15 Loops (PI Coils) |
Math Instructions | 62 (31 AS Coils, 31 MD Coils) Up to 124 Additional (Plus Unused T, C, R, G coils) |
Math Operations | + - x / |
Data Multiplexer Instructions | 15 (MX Coils) |
Resolution | 2-bit, 4 Data Registers |
Data Registers | 240 (DR Coils, 16-bit) |
Shift Instruction | 1 8-bit (S Coil) |
Analog Ramp Instructions | 31 (AR Coils) |
Discrete Inputs | |
Current Consumption | 3.2mA @24VDC |
Input Signal ”OFF” Threshold | 24VDC: < 5VDC |
Input Signal ”ON” Threshold | 24VDC: > 15VDC |
Input On Delay | DC: 5ms |
Input Off Delay | DC: 3ms |
Transistor Type | 3-wire PNP Sensor compatible |
High Speed Input Frequency | 1kHz |
Standard Input Frequency | < 40 Hz |
Required Protection | Inverse voltage protection required |
Analog Inputs | |
Resolution | 12 bit |
Acceptable Input Range | Analog input: 0-10VDC voltage, 24VDC when used as discrete input |
Input Signal ”OFF” Threshold | < 5VDC (as 24VDC discrete input) |
Input Signal ”ON” Threshold | > 9.8VDC (as 24VDC discrete input) |
Isolation | None |
Short Circuit Protection | Yes |
Total Number Available | A01-A04 (I09-I0C) |
Transistor Outputs | |
Pulse Outputs | 1 PWM and 1 PWM or Pulse Output |
PWM Max. Output Frequency | 0.5kHz (1ms on,1ms off) |
Standard Max. Output Frequency | 100Hz |
Voltage Specification | 10-28.8VDC |
Current Capacity | 1A |
Maximum Load | Resistive: 0.5A/point; Inductive:?0.3A/point |
Minimum Load | 0.2mA |
Built-in RS485 Communication | |
Modbus-RTU | Master/Slave mode, 4800-115.2kb, |
supports Modbus function codes 1, 3, 5, 6, 16 | |
DataLink | Link up to 8 Remote-I/O slave units (SG2-20Vx-x only) to 1-master unit at 8.4kb |
Remote-I/O | Link up to 3 SG2-20Vx-x units (1-master, 2-slaves) at 38.4kb |
Environmental Conditions
Enclosure Type | IP20 |
Maximum Vibration | 1G According to IEC60068-2-6 |
Operating Temperature Range | -4° to 131°F (-20° to 55°C) |
Storage Temperature Range | -40° to 158°F (-40° to 70°C) |
Maximum Humidity | 90% (Relative, Non-condensing) |
Vibration | 0.075mm Amplitude; 1.0g Acceleration |
Weight | 10-point: 230g; 8-point:190g; 20-point: 345g |
Agency Approvals | cUL , CE, UL, UL File# E205406 |