TD200-4003-3PH, VFD, 3HP, 480V 3PH IN, 480V 3PH OUT

FMX TD200 Series Variable Frequency AC Drive (VFD), 3HP, 480V 3PH Input, 480V 3PH Output, 5.2 FLA, Frame 2, includes braking transistor, IP20
Item: TD200-4003-3PH
(0) No Reviews yet

Quantity Pricing

SKU: TD200-4003-3PH
Orders up to 7PM ET Ship same day!
Weight: 3.52 lbs.
Made in: China

Related Videos


FMX TD200 Series Variable Frequency AC Drive (VFD), 3HP, 480V 3PH Input, 480V 3PH Output, 5.2 FLA, Frame 2, includes braking transistor, IP20
  • Auto-tuning Sensorless Vector Control with V/HZ mode
  • Pulse Width modulation (PWM utilizing IGBT technology)
  • Built-in PID control
  • 150% rated current for 1 minute, 200% instantaneous
  • 2 Analog Inputs: 0-10VDC and 4-20mA signals
  • Digital Inputs: 5 NO/NC selectable
  • 1 Analog Output (0-10VDC)
  • 1 Multi-function Digital Relay Output
  • Built-in dynamic braking transistor (480V Models)
  • Electronic overload protection and stall prevention
  • Ground fault and short circuit protection
  • Built-in RS485
  • 2 year warranty

General Specifications

Rated Input Power480V Class – 380 to 480V, +10% / -15%
Output Voltage Range480V: 0–480V, 3-Phase
Rated Output Frequency0–599Hz
Output Frequency Accuracy0.01Hz
Control ModeSensorless Vector, V/Hz
Carrier Frequency1 to 16kHz
Frequency Control Range0.01–599.00Hz
Speed Control AccuracyV/Hz: +/- 2%
Sensorless Vector: +/- 0.5%
Overload Capacity150% Rated Output Current for 60 sec.
Frequency Setting Signal0-10VDC, 4-20mA
Accel/Decel Time0–3600 sec. (Independent Accel/Decel Times)
Number of V/F Patterns6 Preset V/F Patterns, 1 Custom V/F Pattern
Braking TorqueApproximately 20%
Protective FunctionsStall Prevention, Instantaneous Overcurrent (200%), Motor Overload Protection, Overvoltage, Undervoltage, Momentary Power Loss, Overheat Protection, Ground Fault

Environmental Conditions

LocationIndoor (IP20)
Ambient Temperature14 to 122°F (-10 to 50°C)
Storage Temperature-4 to 158°F (-15 to 70°C)
Humidity<95% RH (Non-condensing)
Vibration9.8m/s2 (1.0G)
Agency ApprovalsUL/cUL File# E503131, RoHS, CE 61800-3, IEC 60018-2-78

Related Items

Knowledge base

TitleSummaryRelated Links

Determining Motor Full Load Amps (FLA)

How to determine your motor’s FLA.

TD200 PID Quick Start

How to setup PID control for TD200 series AC drives.

FM50 Series to TD200 Series Model Number and Parameter Cross Reference

Cross reference charts for FM50 series to TD200 series AC drives.

TD200 Series Frequency Source Selection

How to set the Frequency Source for TD200 series AC drives.

TD200 Series Run Command Source Selection

How to set the Run Command Source for TD200 series AC drives

TD200 Series Emergency Stop

How to setup a digital input on the TD200 series AC drive as an Emergency Stop

TD200 Series Forward and Reverse Jog

How to setup the TD200 to use Jog controls

TD200 Series Analog Output Setup

How to setup the Analog Output on TD200 series AC drives

TD200 Series Motor Rotation Direction Check

How to check the Motor Rotation Direction for Accuracy

Wiring Devices Using External Power Supply

How to wire externally powered devices to the TD200 input terminals.

Using a Panel Meter with TD200

How to use a panel meter and potentiometer to provide external speed display and control with the TD200

Connecting the Tough Drive to TD-Link Software

Establishing a connection between the Tough Drive and TD-Link software...

Ratings & Reviews

No reviews available

Be the first to Write a Review

Related Videos