PD22-POT010K, FMX 22mm Monoblock Potentiometer, Single Turn, 10k Ohm, UL Type 1, 2, 3R, 4, 4X, 12
FMX 22mm Monoblock Potentiometer, Single Turn, 10k Ohm, UL Type 1, 2, 3R, 4, 4X, 12
Made in: Italy
Specifications
FMX 22mm Monoblock Potentiometer, Single Turn, 10k Ohm, UL Type 1, 2, 3R, 4, 4X, 12
- Typically used for regulating parameters of many devices (e.g. the speed of the electric motors through VFDs)
- Single-turn (270°) and graduated scale
- Built-in screw terminals
- Stable, constant resistance values over time
- Operating temperature: -25...+70°C
- Storage temperature: -40...+85°C
- Front: IP66, IP67, IP69K, Rear: IP20
- Front: UL Type 1, 3R, 4, 4X, 12, and 12K
GENERAL SPECIFICATIONS
| Rated Insulation Voltage Ui | 250VAC |
| Impulse withstand Voltage Uimp | 4kV |
| Monoblock Body | 1-turn graduated scale Any fitting position permitted |
| Mounting Hole Size | Ø22mm/Ø0.87” (Tmax = 2.3Nm/1.69lbft) |
| Resistive Material | Cermet |
| Operation | Linear |
| Resistance Tolerance | ±10% |
| Max. Power | 1W (158°F or 70°C) |
| Mechanical Endurance | 25,000 operations |
| Mechanical Travel | 290° |
| Cable Entry | Side |
| Ambient Conditions | Operating temperature: -13° to 158°F (-25...+70°C) Storage temperature: -40° to 185°F (-40...+85°C) |
| Degree of Protection | Per UL: Type 1, 2, 3R, 4, 4X 12, 12K on front |
| Materials | Polyamide |
| Screw Terminal Connections | three separate connections |
| Minimum Cable Size | 0.5mm² / AWG24 |
| Maximum Cable Size | 2.5mm² / AWG14 |
| Maximum Tightening Torque | 0.5Nm/0.37lbft |
| Flat-head Screwdriver | 0.6x3.5mm/0.02x0.14” |
| Certifications and Compliance | Certifications obtained: cULus, EAC, CCC (pending) Compliant with standards: IEC/EN 60947-1 IEC/EN 60947-5-1, UL508, CSA C22.2 n° 14 |
