Input Power Voltage Range	110/220VAC: 85-265VAC
Power Consumption	100-240VAC: 90mA
Wire Size (All Terminals)	26 to 14 AWG
Programming
Programming Languages	Ladder/Function Block
Program Memory	300 Lines or 260 Function Blocks
Programming Storage Media	Flash
Execution Speed	10ms/cycle
Auxiliary Coils	126 (63 M-coils, 63 N-coils)
Timers	31 T-coils
Timing Ranges	0.01s–9999min
Counters	31 C-coils
Highest Count	999999
RTC (Real Time Clock)	31 R-coils
Resolution	1 min
Time Span Available	Week, Year, Month, Day, Hour, Min
Daylight Savings Feature	Yes
Power Off RTC Retention	240 Hours
Compare Instructions (Analog, Timer, or Counter Values)	31 G-coils
Compare Functions	EQ, LT, GT, LE, GE, NE
PID Control (Proportional-Integral-Derivative)	15 Loops (PI Coils)
Math Instructions	62 (31 AS Coils, 31 MD Coils) Up to 124 Additional (Plus Unused T, C, R, G coils)
Math Operations	+ - x /
Data Multiplexer Instructions	15 (MX Coils)
Resolution	2-bit, 4 Data Registers
Data Registers	240 (DR Coils, 16-bit)
Shift Instruction	1 8-bit (S Coil)
Analog Ramp Instructions	31 (AR Coils)
Discrete Inputs
Current Consumption	1.3mA @100-240VAC
Input Signal ”OFF” Threshold	110/220VAC: < 40VAC
Input Signal ”ON” Threshold	110/220VAC: > 79VAC
Input On Delay	120VAC: 90ms; 240VAC: 50ms
Input Off Delay	120VAC: 90ms; 240VAC: 50ms
Transistor Type	3-wire PNP Sensor compatible
High Speed Input Frequency	1kHz
Standard Input Frequency	< 40 Hz
Required Protection	Inverse voltage protection required
Relay Outputs
Contact Material	Ag Alloy
Current Rating	8A
HP Rating	1/3HP@120V 1/2HP@250V
Maximum Load	Resistive: 8A/point; Inductive: 4A/point
Maximum Operating Time	15ms (normal condition)
Life Expectancy (Rated Load)	100k operations
Minimum Load	16.7mA

Enclosure Type	IP20
Maximum Vibration	1G According to IEC60068-2-6
Operating Temperature Range	-4° to 131°F (-20° to 55°C)
Storage Temperature Range	-40° to 158°F (-40° to 70°C)
Maximum Humidity	90% (Relative, Non-condensing)
Vibration	0.075mm Amplitude; 1.0g Acceleration
Weight	10-point: 230g; 8-point:190g; 20-point: 345g
Agency Approvals	cUL , CE, UL, UL File# E205406

Title	Summary	Related Links
AN-SG2-001 SG2 Software Download	This application note will explain how to download the SG2 software from the FactoryMation website and how to set-up software on a computer using Windows 7 operating system..
AN-SG2-002 Uninstalling SG2 Software	This App Note will show how to uninstall SG2 software using Windows 7 operating system
AN-SG2-003 Opening and Linking SG2 Software to SG2 unit	In this App Note, we will be opening a new SG2 program and linking the SG2 software to the SG2 Programmable Logic Relay
AN-SG2-004 Creating and Loading an SG2 Program	In this App Note, we will be creating an SG2 program and then loading the program into an SG2 Programmable Logic Relay
AN-SG2-005 Simulating SG2 program using the SG2 Software	Simulating SG2 program using the SG2 Software
AN-SG2-006 Defining the Ladder Logic Tool Bar	Defining the Ladder Logic Tool Bar for the SG2 Client Software.
AN-SG2-007 Upload/Download an SG2 Program	Upload/Download an existing SG2 Program
AN-SG2-008 SG2 Ladder Structure for 3 Contact Program	We will define the basic structure of a Ladder Logic program
AN-SG2-009 Digital Inputs (AC/DC)	Discuss the proper types of input sources for each type of digital input, and we will identify both AC and DC inputs
AN-SG2-010 Output Types (hardware and software)	Discuss the different Hardware Output options for the SG2 Programmable Logic Relay (Relay or Transistor), also, the Software Output Types (General, Set, Reset, and Pulse)
AN-SG2-011 Compatible Sensor Types	Give examples of the sensor types that are compatible for use with the SG2 Programmable Logic Relay
AN-SG2-012 Analog Inputs for the SG2 Base Unit	We will show the Analog Input capabilities of the SG2 Base units
AN-SG2-013 Explaining Auxiliary Relay contact/coil options	We will define the auxiliary relay contact/coil options...
AN-SG2-014 SG2 Timer Instructions	We will show how to use a Timer Instruction..
AN-SG2-015 SG2 Counter Instructions	A Counter Instruction will be used to monitor an input and activate an output coil after a certain number of events..
AN-SG2-016 Comparator Instruction	All Comparator Instruction Modes will be defined. ...
AN-SG2-017 Differential (One Shot) Instructions	We will demonstrate how to use both the rising edge and falling edge Differential (One Shot) instruction..
AN-SG2-018 Timer Instruction Modes	Timer Instruction modes, definitions, and common inputs will be reviewed
AN-SG2-019 Counter Instruction Modes	Counter modes will be defined and demonstrated....
AN-SG2-020 Real Time Clock Instructions	Real Time Clock (RTC) modes will be defined...
AN-SG2-021 Multiplexer Instruction	We will define and demonstrate the Multiplexer Instruction....
AN-SG2-022 Mathematical Instructions	Demonstrate the Add/Subtract and the Multiply/Divide mathematical instructions....
AN-SG2-023 Connect and configure SG2 PLR to the iView HMI	Explains how to connect the SG2 PLR to the iView HMI using the RS232 communication port...
AN-SG2-024 SG2 PLR and iView HMI Programs for RS232 Communication	Shows how to set the programming for the operation of the SG2 PLR and iView HMI...
AN-SG2-025 Using the SG2 PLR and iView HMI on Modbus RTU	Shows you how to use the SG2 PLR and iView HMI on Modbus RTU

SG2-10CR-A, SG2 PLR, 6 AC IN, 4 Relay OUT, Bare-board (OEM)

Quantity Pricing

Specifications

General Specifications

Environmental Conditions

Related Items

Resources

Knowledge base <img src="/assets/images/knowledge_base/Knowledge-Base_icon.png" alt="">

Ratings & Reviews

No reviews available

Knowledge base