48.52.7.012.0050-10PK, Interface Relay, 8A DPDT, 12V DC coil
Finder Electromechanical Interface Relay Module, 8A DPDT, 12V DC coil, with LED indicator and protective module, screw terminal socket Pack of 10
Made in: Italy
48.52.7.012.0050-10PK, Interface Relay, 8A DPDT, 12V DC coil
Finder Electromechanical Interface Relay Module, 8A DPDT, 12V DC coil, with LED indicator and protective module, screw terminal socket Pack of 10
Made in: Italy
Specifications
Finder Electromechanical Interface Relay Module, 8A DPDT, 12V DC coil, with LED indicator and protective module, screw terminal socket Pack of 10
- Slim 15.8mm wide package
- Push-in and screw terminal modules available
- 35mm DIN rail mounting
- Replaceable relay or socket
- Easy removal of relay
- IP20 protection rating
- Integral LED shows coil status
- AC coil and DC coil versions
- SPDT and DPDT versions
- Transient voltage coil suppression circuit
GENERAL SPECIFICATIONS
| Configuration | 2CO (DPDT) |
| Contact Rating | 8A at 250VAC 8A at 30VDC |
| Rated Load AC1 | 2,000VA |
| Rated Load AC15 (230VAC) | 400VA |
| Single Phase Motor Rating (230VAC) | 0.3kW |
| Breaking Capacity DC1 | 30V : 8A 110V : 0.3A 220V: 0.12A |
| Minimum Switching Load | 300mW (5V/5mA) |
| Coil Nominal Voltage | 12VDC |
| Coil Consumption | 41mA |
| Coil Rated Power | 0.5W |
| Coil Voltage Operating Range | 8.8 to 18VDC |
| Coil Holding Voltage | 4.8VDC |
| Coil Must Drop-out Voltage | 1.2VDC |
| Mechanical Life | 10,000,000 |
| Electrical Life at Rated AC1 Load | 200,000 |
| Operate / Release Time | 12ms / 12ms |
| Terminal Connection Type | Screw Terminal |
| Insulation between Coil and Contacts (1.2/50µs) | 6kV (8mm) |
| Dielectric Strength Between Open Contacts | 1,000VAC |
| Ambient Temperature | -40° to 185°F (-40 to 85°C) |
| Environmental Protection | IP20 |
