Delta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - Relay, Output 2 - Relay, Process Control
In StockDelta Temperature Controller, Series B, 1/8 DIN, 24VDC Input, Output 1 - Relay, Output 2 - Relay, Process Control - Non-cancelable/Non-returnable.
In StockDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - Pulse Voltage, Output 2 - Relay, Process Control - Non-cancelable/Non-returnable.
In StockDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - DC Current, Output 2 - Relay, Process Control - Non-cancelable/Non-returnable. MOQ - 12
In StockDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - Linear Voltage, Output 2 - Relay, Process Control - Non-cancelable/Non-returnable.
In StockDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - DC Current, Output 2 - Pulse Voltage, Process Control.
Minimum order quantity = 12
Lead TimeDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - Linear Voltage, Output 2 - Pulse Voltage, Process Control - Non-cancelable/Non-returnable.
Minimum order quantity = 12
In StockDelta Temperature Controller, Series B, 1/8 DIN, 100-240VAC Input, Output 1 - Pulse Voltage, Output 2 - Pulse Voltage, Process Control.
Minimum order quantity = 12
In StockDelta’s DTB Temperature Controllers receive input signals from devices such as temperature sensors. The controller then uses that data to compare to the desired temperature and provides output to another part of the control system, such as a fan or a heater, to manipulate the temperature.
DTB Application Notes 
DTB Video 
DTB Software • Extremely Versatile: Able to be used as a Process controller or Temperature controller.
• Four Sizes Available: 1/32 DIN, 1/16 DIN, 1/8 DIN, and 1/4 DIN
• Multiple output configurations
• Dual Output Control enables both Heating and Cooling control
• Four Control Modes: PID w/ Auto-Tune, ON/OFF, Manual, and PID Programmable Control (Ramp/Soak)
• RS-485, 2400 to 38,400bps, MODBUS RTU/ASCII
• 4-digit PV line displays process value or parameter type
• 4-digit SV line displays set point, parameter operation read value, manipulated variable, or set value
• Includes indicators for Auto-Tuning, Output, Temperature in Celsius and Fahrenheit, and Alarm(s)
• Function Key selects the desired function mode and confirms a setting value
• Mode Key sets parameters within function mode
• Up and Down Keys increase or decrease the values displayed on the SV display line
The DTB Series meters work great as both temperature and process controllers. Their range of analog inputs enable their flexibility as process controllers.
The DTB Series accepts a variety of sensor inputs. With these sensor inputs, the DTB can help manage the temperature in or around an application by operating a heating unit, fan, or other device when it is told by the input that a set temperature point has been reached.
Temperature Control Inputs
• Thermocouple Sensors (K, J, T, E, N, R, S, B, L, U, TXK)
• 3-Wire Platinum RTD Sensors
By accepting analog inputs, DTB meters can work as process controllers in addition to simple temperature control. While temperature sensor inputs operate on a basic on/off signal, devices that send analog inputs to the DTB meter can relay more specific data. The meter can then use this information to output greater control over an application. One example of this could be anticipating a change in state of the application through an additional metering device rather than reacting to it via sensor input.
Process Control Inputs
• Analog Inputs (0-5V, 0-10V, 0-20mA, 4-20mA, 0-50mV)
Universal Sensor Inputs enable the panel meter to convert any signal in the appropriate voltage range to a value on the display. The DTB's Universal Sensor Input means that the series can receive signals from virtually any manor of sensor including temperature, pressure, position, and more.
Thermocouple (K, J, T, E, N, R, S, B, L, U, TXK)
3 Wire Platinum RTD (pt100, jpt100)
Analog Input (0-5V, 0-10V, 0-20mA, 4-20mA, 0-50mV)
Overall
| Frame | Part Number | A | B | C |
|---|---|---|---|---|
| 1/32 DIN | DTB4824 | 0.94 (23.8) | 1.88 (47.8) | 4.06 (103.1) |
| 1/16 DIN | DTB4848 | 1.87 (47.6) | 1.87 (47.6) | 3.50 (88.8) |
| 1/8 DIN | DTB4896 | 3.77 (95.8) | 1.88 (47.8) | 3.62 (92.0) |
| 1/4 DIN | DTB9696 | 3.77 (95.8) | 3.77 (95.9) | 3.72 (94.5) |
Cutout
| Frame | Part Number | D | E |
|---|---|---|---|
| 1/32 DIN | DTB4824 | 0.86 (21.9) | 1.77 (44.9) |
| 1/16 DIN | DTB4848 | 1.76 (44.8) | 1.76 (44.8) |
| 1/8 DIN | DTB4896 | 3.58 (91.0) | 1.73 (44.0) |
| 1/4 DIN | DTB9696 | 3.57 (90.8) | 3.57 (90.8) |
The DTB Temperature/Process Controllers are available with either AC or DC input and seven different output configurations to meet your application’s needs.
| OUTPUT CONFIG | OUTPUT 1 | OUTPUT 2 |
|---|---|---|
| CV | DC Current | Pulse Voltage |
| CR | DC Current | Relay |
| LV | Linear Voltage | Pulse Voltage |
| LR | Linear Voltage | Relay |
| VV | Pulse Voltage | Pulse Voltage |
| VR | Pulse Voltage | Relay |
| RR | Relay | Relay |
Temperature Controller – Heat Control
Process Controller – Tank Fill Control
See real-time temperature readings and adjust set points directly from the software
Starburst LCD display allows for a custom 4 character message
Use the software for testing and debugging the DTB temperature/process controllers
Keep your DTB controller’s firmware up to date
