PCQ110, Pool and Spa Mtr, 1HP, 3600RPM, K48Y, 115/230V, 12.5/6.25 FLA, 1PH, Square Flange, ODP

WEG Pool and Spa Motor, 1HP, 3600RPM, K48Y Frame, 115/230V, 12.5/6.25 FLA, 60Hz, Single Phase, Square Flange, ODP, Start Capacitor, Low Service Factor-Up Rate: Service Factor 1.25

*Images are for illustrative purposes and may not represent the actual configuration of the product.

Weight: 24 lbs.Made in: Brazil

PCQ110, Pool and Spa Mtr, 1HP, 3600RPM, K48Y, 115/230V, 12.5/6.25 FLA, 1PH, Square Flange, ODP

WEG Pool and Spa Motor, 1HP, 3600RPM, K48Y Frame, 115/230V, 12.5/6.25 FLA, 60Hz, Single Phase, Square Flange, ODP, Start Capacitor, Low Service Factor-Up Rate: Service Factor 1.25

*Images are for illustrative purposes and may not represent the actual configuration of the product.

Weight: 24 lbs.Made in: Brazil
Drop Ship
$288.30
QuantityPrice


Typically Ships Within 1 Business Day

Specifications

WEG Pool and Spa Motor, 1HP, 3600RPM, K48Y Frame, 115/230V, 12.5/6.25 FLA, 60Hz, Single Phase, Square Flange, ODP, Start Capacitor, Low Service Factor-Up Rate: Service Factor 1.25

*Images are for illustrative purposes and may not represent the actual configuration of the product.

  • Single -phase, II pole, 60Hz
  • Voltage: 115-230V or 230V
  • Cast iron C-face or aluminum square flange
  • Open Drip Proof (ODP) IP21
  • Dual compartment up to 2 1/2HP
  • 50°C ambient
  • Class 'B' insulation
  • CCW (pump end) - non reversible
  • AISI 316 stainless steel shaft
  • Automatic overload protection
  • Threaded shaft
  • Internal and external grounding
  • Terminal box threaded NPT 1/2"
  • D.E. sealed ball bearings
  • D.E. endshield sealing - V-ring
  • Epoxy coating
  • '1081' design

Specifications

PhaseSingle Phase
FrameK48Y
Output1 HP
Poles02
Frequency60 Hz
Rated speed3470 rpm
Slip3.61 %
Full Voltage - No Cables115/230 V
Rated Current12.5/6.25 A
LR Amperes71.2/35.6 A
LRC5.7x(Code K)
No Load Current 8.30/4.15 A
Rated Torque1.51 ft.lb
Locked Rotor Torque140 %
Breakdown Torque250 %
Insulation ClassB
Service Factor1.25
Moment of Inertia0.0297 sq.ft.lb
Design-
Locked Rotor Time10s (cold) 6s (hot)
Temperature Rise70 K
Duty CycleS1
Maximum Room Temperature50 °C
Minimum Room Temperature-20 °C
Degree of ProtectionIP21
Altitude1000 m
Cooling MethodODP Open Drip Proof Open Motor
MountingF-1
Rotation DirectionCounter Clockwise
Noise Level58.0 dB(A)
Starting Method-
Enclosure MaterialSteel Plate
Front Bearing Shielding2RS
Front Bearing Size6203
Front Bearing TypeBall
Front Sealing TypeLip Seal
Rear Bearing Shielding2RS
Rear Bearing Size6203
Rear Bearing TypeBall
Rear Sealing TypeNo Rear Sealing
Grease TypeMobil Polyrex EM
VFD Turndown VTN/A
VFD Turndown CTN/A

Ratings & Reviews

No reviews available

Be the first to Write a Review