IC330-250L-22-AD500, Contactor, 250A, 3 Pole, Aux: 2NO/2NC, Coil: 430-500VAC/DC
FMX Contactor, 250A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 430-500VAC/DC
Weight: 13.27 lbs.Made in: Brazil
IC330-250L-22-AD500, Contactor, 250A, 3 Pole, Aux: 2NO/2NC, Coil: 430-500VAC/DC
FMX Contactor, 250A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 430-500VAC/DC
Weight: 13.27 lbs.Made in: Brazil
Specifications
FMX Contactor, 250A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 430-500VAC/DC
- 3/4HP to 75HP
- DIN-rail mountable up to 105A frame
- UL508 Listed
- UL and CE Certified
- IEC 60947
- 1 year warranty
UL HP Ratings (AC3 Motor Load)
| Three Phase | |
| 200V | 75HP (221A) |
| 230V | 100HP (248A) |
| 460V | 200HP (240A) |
| 575V | 250HP (242A) |
| Optional Overload Relay | IOL-300L |
General Specifications
| Contactor Frame Size | 250A |
| Rated Insulation Voltage | UL/CSA: 600V IEC/VDE 0660: 1000V |
| Rated Impulse Voltage IEC60947-1 | 8kV |
| Degree of Protection | Main Terminals: IP00 Coil Terminals: IP20 Auxiliary Terminals: IP20 |
| Rated Operating Frequency | 25 to 400 Hz |
| Vibration Resistance (5 to 200Hz) | Contactor Open: 4g Contactor Closed at Coil: 4g |
| Mechanical Endurance | 10,000,000 Operations |
| Electrical Endurance (AC-3) | 1,000,000 Operations |
| Shock Resistance (1/2 Sine Wave = 11ms) | Contactor Open: 3g Contactor Closed at Coil: 3g |
| SCCR | 5kA |
| Busbar (width x thickness) | 30 x 5mm |
| Power Terminals Screw Driver | M10 Hex |
| Tightening Torque | 203.6 to 230.1 lb-in |
| Environmental Conditions | Ambient Storage Temperature: -67° to 176°F (-55° to 80°C) Operating Ambient Temperature : -13° to 131°F (-25° to 55°C) Climatic Withstand: According to IEC 60680-2 Pollution Degree: 3 Mounting: Screw to Panel |
| Dimensions | 7.8" H x 5.8" W x 7.1"D (198mm H x 147.5mm W x 181mm D) |
| Weight | 15.1 lbs |
| Warranty | 1.5 years |
Control Circuit Ratings
| AC (50/60Hz) / DC Coil Voltage Class | 430 to 500V |
| Voltage Range | 344 to 550VAC/DC |
| Coil Operating Limits | Pick-up: 258 to 375VAC/DC Drop-out: 172 to 300VAC/DC |
| Coil Consumption (Single Coils) | Sealed:35.2VA (AC) / 12.5W (DC) Inrush:518VA (AC) / 380W (DC) |
| Heat Loss | 9.2W |
| Power Factor | Sealed: 0.26 Cosɸ Inrush: 0.73 Cosɸ |
| Operating Time | Coil Energization-N.O. : 65 to 85ms Coil De-energization-N.O. : 40 to 65ms |
