E510-420-H3N4-U-1PD, VFD, 18.5 FLA CT, 460V 1PH IN, 460V 3PH Out
TECO E510 AC Drive, 18.5 FLA Constant Torque, 460V 1PH Input, 460V 3PH Output, UL Type (NEMA) 4x / IP66, Frame 3 Typically ships within 1 business day.
Weight: 28 lbs.Made in: Taiwan (Province of China)
Specifications
TECO E510 AC Drive, 18.5 FLA Constant Torque, 460V 1PH Input, 460V 3PH Output, UL Type (NEMA) 4x / IP66, Frame 3 Typically ships within 1 business day.
General Specifications
| Rated Input Power | 480V Class – 380 to 480V, +10% / -15% |
| Output Voltage Range | 480V: 0–480V, 3-Phase |
| Rated Output Frequency | 0–650Hz |
| Output Frequency Accuracy | 0.01Hz |
| Control Mode | Sensorless Vector, V/Hz |
| Carrier Frequency | 1 to 16kHz |
| Frequency Control Range | 0.01–650.00Hz |
| Overload Capacity | 150% Rated Output Current for 60 sec. |
| Frequency Setting Signal | 0-10VDC, 4-20mA |
| Accel/Decel Time | 0–3600 sec. (Independent Accel/Decel Times) |
| Number of V/F Patterns | 18 Preset V/F Patterns, 1 Custom V/F Pattern |
| Protective Functions | Stall Prevention, Instantaneous Overcurrent (200%), Motor Overload Protection, Overvoltage, Undervoltage, Momentary Power Loss, Overheat Protection, Ground Fault |
| Location | Indoor UL Type 4X (IP66) |
| Ambient Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -4 to 140°F (-15 to 60°C) |
| Altitude | <1000m |
| Humidity | <95% RH (Non-condensing) |
| Vibration | 9.8m/s2 (1.0G) |
| Agency Approvals | UL/cUL File# E177007, RoHS, CE 61800-3, IEC 60018-2-78 |
Environmental Conditions
| Location | Indoor UL Type 4X (IP66) |
| Ambient Temperature | 14 to 122°F (-10 to 50°C) |
| Storage Temperature | -4 to 140°F (-15 to 60°C) |
| Altitude | <1000m |
| Humidity | <95% RH (Non-condensing) |
| Vibration | <9.8m/s2 (1.0G) |
| Agency Approvals | UL/cUL File# E177007, RoHS, CE 61800-3, IEC 60018-2-78 |
Dimensions
| Frame Size | 3 |
| Dimensions | 18.36"H x 8.77"W x 9.71"D (466.3mm x 222.8mm x 246.6mm) |
| Recommended Air Circulation Space | 4.8" Top and Bottom = 9.6"H 2" Each Side = 4" W 2" to the Depth = 2" D |