BCR01-CSW30, 30mm contact block, 1 N.C., Delayed Break
WEG 30mm contact block, 1 N.C., Delayed Break
Weight: 0.1 lbs.
Made in: Brazil
Specifications
WEG 30mm contact block, 1 N.C., Delayed Break
- Simple snap-in installation
- Up to 8 contact blocks per operator possible (non-illuminated operators)
- 35° angle terminals for easy wiring
- Stainless steel spring
- Clear plastic cover for easy inspection
- Self-lubricating Teflon-infused stroker seal
- Self-wiping silver contacts with high contact pressure
- Color-coded for easy identification
- Self-lifting captive wire clamps
- Two AWG 22 to AWG 12 wires per terminal
GENERAL SPECIFICATIONS
| Dielectric Strength (terminal to ground) | |
| AC | UL - A600 Make Rate - 7200VA Break Rating - 720VA Ith (Thermal Current) - 10A |
| DC | UL - P300 Make Rating - 138VA Break Rating - 138VA Ith (Thermal Current) - 5A |
| Mechanical Endurance | 10,000,000 cycles |
| Terminal Capacity | Minimum 1 x 22AWG Maximum 2 x 12AWG |
| Tightening Torque | 7 in-lb |
| Operating Temperature | -40° to 131°F (-40° to 55°C) |
| Storage Temperature | -40° to 185°F (-40° to 85°C) |
| Certification | UL listed |
