48.P6.8.120.0060-10PK, Push-in Interface Relay, 16A SPDT, 120VAC Coil
Finder Electromechanical Push-in Interface Relay Module, 16A SPDT, 120VAC Coil, with LED indicator and protective module Pack of 10
Made in: Italy
48.P6.8.120.0060-10PK, Push-in Interface Relay, 16A SPDT, 120VAC Coil
Finder Electromechanical Push-in Interface Relay Module, 16A SPDT, 120VAC Coil, with LED indicator and protective module Pack of 10
Made in: Italy
Specifications
Finder Electromechanical Push-in Interface Relay Module, 16A SPDT, 120VAC Coil, with LED indicator and protective module Pack of 10
- Slim 15.8mm wide package
- Push-in and screw terminal modules available
- 35mm DIN rail mounting
- Replaceable relay or socket
- Easy removal of relay
- IP20 protection rating
- Integral LED shows coil status
- AC coil and DC coil versions
- SPDT and DPDT versions
- Transient voltage coil suppression circuit
GENERAL SPECIFICATIONS
| Configuration | 1CO (SPDT) |
| Contact Rating (For current exceeding 10A contact terminals must be connected in parallel) (Terminal: 11 to 21, 14 to 24, 12 to 22) | 16A at 250VAC 16A at 30VDC |
| Rated Load AC1 | 4,000VA |
| Rated Load AC15 (230VAC) | 750VA |
| Single Phase Motor Rating (230VAC) | 0.55kW |
| Breaking Capacity DC1 | 30V : 16A 110V : 0.3A 220V: 0.12A |
| Minimum Switching Load | 500mW (10V/5mA) |
| Coil Nominal Voltage | 120VAC |
| Coil Consumption | 11.8mA |
| Coil Rated Power | 1.2VA (50Hz) |
| Coil Voltage Operating Range | 96 to 132VAC |
| Coil Holding Voltage | 96VAC |
| Coil Must Drop-out Voltage | 24VAC |
| Mechanical Life | 10,000,000 |
| Electrical Life at Rated AC1 Load | 100,000 |
| Operate / Release Time | 7ms / 4ms |
| Terminal Connection Type | Push-In Terminal |
| Insulation between Coil and Contacts (1.2/50µs) | 6kV (8mm) |
| Dielectric Strength Between Open Contacts | 1,000VAC |
| Ambient Temperature | -40° to 158°F (-40 to 70°C) |
| Environmental Protection | IP20 |
