04026EP3QCT365V-W22, AC Mtr, TEFC, Two Speed, 3PH, 40/10 HP, 30/7.5 kW, 1200/600 RPM, 365T NEMA, 460V, 48.9 FLA
04026EP3QCT365V-W22, AC Mtr, TEFC, Two Speed, 3PH, 40/10 HP, 30/7.5 kW, 1200/600 RPM, 365T NEMA, 460V, 48.9 FLA
WEG AC Motor, Cast Iron Frame, TEFC, F2 Mount, Two Speed - Single Windings, High Efficiency (EPACT), 3 PH, 40/10 HP, 30/7.5 kW, 1200/600 RPM, 365T NEMA Frame, Three-Phase – Double speed (1 & 2 Windings) - High Efficiency, 1.15 Service Factor, 460V, 48.9 FLA, 60 Hz. **Must Ship LTL Truck Freight**
*Images are for illustrative purposes and may not represent the actual configuration of the product.
Must Ship LTL Truck Freight
Specifications 
Resources 
Specifications
WEG AC Motor, Cast Iron Frame, TEFC, F2 Mount, Two Speed - Single Windings, High Efficiency (EPACT), 3 PH, 40/10 HP, 30/7.5 kW, 1200/600 RPM, 365T NEMA Frame, Three-Phase – Double speed (1 & 2 Windings) - High Efficiency, 1.15 Service Factor, 460V, 48.9 FLA, 60 Hz. **Must Ship LTL Truck Freight**
*Images are for illustrative purposes and may not represent the actual configuration of the product.
- Three-phase, II, IV, VI, VIII, 60 Hz
- Voltage: 208-230/460V, 200V, 460V or 575V
- Totally Enclosed Fan Cooled – TEFC (IP55) water tight and dust tight enclosure
- Multiple Endbell Drains for shaft up, down or horizontal mounting
- Rubber drain plugs on T-Box and drive-end endshield
- Rubber Lead Separator (isolator) between T-Box and Frame
- Joint Seal
- Internally and Externally Epoxy painted (202E painting plan)
- V-ring slingers for frames 143T to 326T and WSeal for frames 364/5T to on both endshields
- External Slinger (Umbrella Seal)
- Double Sealed - 2RS Ball Bearings for frames up to 445/7T (excluding 364/5T, 404/5T and 445/7T II-pole motors)
- NEMA dimensions
- Double Impregnation and Bake for frames 143T to 326T and Continuous Resin Flow for frames 364/5T to 588/9
- Class ‘F’ insulation for all frames
- Class ‘H’ resin insulation system
- Temperature rise: Class ‘B’ (80ºC)
- Most ratings meet Design C Torque
- Service factor:
- 1.25 up to 100HP
- 1.15 from 125HP & up
- Continuous duty (S1)
- NPT threaded terminal box
- F2 mount
- Color: RAL 5009
- Stainless steel nameplate AISI 316 with laser etching
- MGI Part 31 rating for use with VFD - 1000:1 Variable Torque speed range
Specifications
| Phase | Three Phase |
| Frame | 364/5T |
| Output | 10/40 HP |
| Poles | 12/06 |
| Frequency | 60 Hz |
| Rated speed | 585 rpm |
| Slip | 2.50 % |
| Full Voltage - No Cables | 460 V |
| Rated Current | 17.4 A |
| LR Amperes | 62.6 A |
| LRC | 3.6x(Code E) |
| No Load Current | 14.0 A |
| Rated Torque | 89.8 ft.lb |
| Locked Rotor Torque | 150 % |
| Breakdown Torque | 180 % |
| Insulation Class | F |
| Service Factor | 1.15 |
| Moment of Inertia | 29.0 sq.ft.lb |
| Design | None |
| Locked Rotor Time | 162s (cold) 90s (hot) |
| Temperature Rise | 80 K |
| Duty Cycle | S1 |
| Maximum Room Temperature | 40 °C |
| Minimum Room Temperature | -20 °C |
| Degree of Protection | IP55 |
| Altitude | 1000 m |
| Cooling Method | TEFC Totally Enclosed Fan Cooled |
| Mounting | F-2 |
| Rotation Direction | Both |
| Noise Level | 60.0 dB(A) |
| Starting Method | Direct |
| Enclosure Material | Iron |
| Front Bearing Shielding | 2RS-C3 |
| Front Bearing Size | 6314 |
| Front Bearing Type | Ball |
| Front Sealing Type | W Seal |
| Rear Bearing Shielding | 2RS-C3 |
| Rear Bearing Size | 6314 |
| Rear Bearing Type | Ball |
| Rear Sealing Type | No Rear Sealing |
| Grease Type | Polyrea Ester Oil (WT/ ENS) |
| VFD Turndown VT | 1000:1 |
| VFD Turndown CT | 20:1 |
Application Notes
| Title | Summary | Related Links |
|---|---|---|
| AN-GEN-004 Determining Motor Full Load Amps (FLA) | How to determine your motor’s FLA. |  |
