01012ET3PCT256T-W22, AC Mtr, TEFC, 3PH, 10 HP, 7.5 kW, 1200 RPM, 256T NEMA, 3PH - Footed, 200V, 29.7 FLA
WEG AC Motor, Cast Iron Frame, TEFC, F2 Mount, 3 PH, 10 HP, 7.5 kW, 1200 RPM, 256T NEMA Frame, Three-Phase - Foot Mount - NEMA Premium, 1.25 Service Factor, 200V, 29.7 FLA, 60 Hz.
Weight: 326 lbs.
Made in: Brazil
Specifications
WEG AC Motor, Cast Iron Frame, TEFC, F2 Mount, 3 PH, 10 HP, 7.5 kW, 1200 RPM, 256T NEMA Frame, Three-Phase - Foot Mount - NEMA Premium, 1.25 Service Factor, 200V, 29.7 FLA, 60 Hz.
- Three-phase, II, IV, VI, VIII, 60 Hz
- Voltage: 208-230/460V, 200V, 460V or 575V
- Totally Enclosed Fan Cooled – TEFC (IP55) water tight and dust tight enclosure
- Multiple Endbell Drains for shaft up, down or horizontal mounting
- Rubber drain plugs on T-Box and drive-end endshield
- Rubber Lead Separator (isolator) between T-Box and Frame
- Joint Seal
- Internally and Externally Epoxy painted (202E painting plan)
- V-ring slingers for frames 143T to 326T and WSeal for frames 364/5T to on both endshields
- External Slinger (Umbrella Seal)
- Double Sealed - 2RS Ball Bearings for frames up to 445/7T (excluding 364/5T, 404/5T and 445/7T II-pole motors)
- NEMA dimensions
- Double Impregnation and Bake for frames 143T to 326T and Continuous Resin Flow for frames 364/5T to 588/9
- Class ‘F’ insulation for all frames
- Class ‘H’ resin insulation system
- Temperature rise: Class ‘B’ (80ºC)
- Most ratings meet Design C Torque
- Service factor:
- 1.25 up to 100HP
- 1.15 from 125HP & up
- Continuous duty (S1)
- NPT threaded terminal box
- F2 mount
- Color: RAL 5009
- Stainless steel nameplate AISI 316 with laser etching
- MGI Part 31 rating for use with VFD - 1000:1 Variable Torque speed range
