00718ET3E213T-S, AC Mtr, 7.5HP, 1800RPM, 213T, 208-230/460V, 20.1-18.2/9.1 FLA, 3PH - TEFC, NORMAL STOCK, NORMAL STOCK
WEG AC MOTOR, 7.5HP, 1800RPM, 213T FRAME, 208-230/460V, 20.1-18.2/9.1 FLA, THREE-PHASE - TEFC (IP55), ROLLED STEEL FRAME, NEMA PREMIUM EFFICIENCY, NORMAL STOCK, SERVICE FACTOR 1.25, NORMAL STOCK,
*Images are for illustrative purposes and may not represent the actual configuration of the product.
Must Ship LTL Truck Freight
00718ET3E213T-S, AC Mtr, 7.5HP, 1800RPM, 213T, 208-230/460V, 20.1-18.2/9.1 FLA, 3PH - TEFC, NORMAL STOCK, NORMAL STOCK
WEG AC MOTOR, 7.5HP, 1800RPM, 213T FRAME, 208-230/460V, 20.1-18.2/9.1 FLA, THREE-PHASE - TEFC (IP55), ROLLED STEEL FRAME, NEMA PREMIUM EFFICIENCY, NORMAL STOCK, SERVICE FACTOR 1.25, NORMAL STOCK,
*Images are for illustrative purposes and may not represent the actual configuration of the product.
Must Ship LTL Truck FreightSpecifications
WEG AC MOTOR, 7.5HP, 1800RPM, 213T FRAME, 208-230/460V, 20.1-18.2/9.1 FLA, THREE-PHASE - TEFC (IP55), ROLLED STEEL FRAME, NEMA PREMIUM EFFICIENCY, NORMAL STOCK, SERVICE FACTOR 1.25, NORMAL STOCK,
*Images are for illustrative purposes and may not represent the actual configuration of the product.
- Three-phase, II, IV, VI and VIII pole, 60Hz
- Voltage: 208-230/460V, 200V, 460V or 575V
- Totally Enclosed Fan Cooled – TEFC (IP55) water tight and dust tight enclosure
- Squirrel cage rotor / Aluminum die cast
- V-ring slingers on both endshields (586/7 frame equipped with labyrinth taconite seal as standard)
- Ball bearings are supplied as standard (RB part numbers supplied with roller bearings)
- 1045 Carbon Steel Shaft for frames up to 365T.
- 4140 steel shaft for motors 404T and above. (3600 RPM motors supplied with 1045)
- NEMA dimensions
- Class ‘F’ insulation for all frames
- Class ‘H’ impregnation resin
- Temperature rise: Class ‘B’ (80ºC)
- NEMA Design ‘B’*
- Most ratings meet Design C Torque
- Service factor: 1.25 up to 100HP;1.15 from 125HP and up
- Continuous duty (S1)
- 104ºF (40ºC) ambient temperature
- Altitude: 3300 ft (1000m)
- NPT threaded terminal box
- F1 mount
- Stainless steel nameplate AISI 316 with laser etching
- Color: RAL 6002 (Green)
- Automatic drain plugs - pressure compensated
- Regreasable bearings positive pressure lubrication system (frames 254T and up)
- Gasketed conduit box
- MGI Part 31 rating for use with VFD - 20:1 constant torque speed range.
