00212AT3ECT184TF1-W2, AC Mtr, TEAO, 3PH, 2 HP, 1.5 kW, 1200 RPM, 184T NEMA, 3PH - Footed, 575V, 3.23 FLA, 60 Hz
WEG AC Motor, Cast Iron Frame, TEAO, 3 PH, 2 HP, 1.5 kW, 1200 RPM, 184T NEMA Frame, Three-Phase - Foot Mount - NEMA Premium, 1.25 Service Factor, 575V, 3.23 FLA, 60 Hz **Must Ship LTL Truck Freight**
*Images are for illustrative purposes and may not represent the actual configuration of the product.
Must Ship LTL Truck Freight
00212AT3ECT184TF1-W2, AC Mtr, TEAO, 3PH, 2 HP, 1.5 kW, 1200 RPM, 184T NEMA, 3PH - Footed, 575V, 3.23 FLA, 60 Hz
WEG AC Motor, Cast Iron Frame, TEAO, 3 PH, 2 HP, 1.5 kW, 1200 RPM, 184T NEMA Frame, Three-Phase - Foot Mount - NEMA Premium, 1.25 Service Factor, 575V, 3.23 FLA, 60 Hz **Must Ship LTL Truck Freight**
*Images are for illustrative purposes and may not represent the actual configuration of the product.
Must Ship LTL Truck FreightSpecifications
WEG AC Motor, Cast Iron Frame, TEAO, 3 PH, 2 HP, 1.5 kW, 1200 RPM, 184T NEMA Frame, Three-Phase - Foot Mount - NEMA Premium, 1.25 Service Factor, 575V, 3.23 FLA, 60 Hz **Must Ship LTL Truck Freight**
*Images are for illustrative purposes and may not represent the actual configuration of the product.
- Three-phase, II, IV, VI, VIII, 60 Hz
- Voltage: 208-230/460V, 200V, 460V or 575V
- Totally Enclosed Air Over – TEAO (IP55) water tight and dust tight enclosure
- Multiple Endbell Drains for shaft up, down or horizontal mounting
- Rubber drain plugs on T-Box and drive-end endshield
- Rubber Lead Separator (isolator) between T-Box and Frame
- Joint Seal
- Internally and Externally Epoxy painted (202E painting plan)
- V-ring slingers for frames 143T to 326T and WSeal for frames 364/5T to on both endshields
- External Slinger (Umbrella Seal)
- Double Sealed - 2RS Ball Bearings for frames up to 445/7T (excluding 364/5T, 404/5T and 445/7T II-pole motors)
- NEMA dimensions
- Double Impregnation and Bake for frames 143T to 326T and Continuous Resin Flow for frames 364/5T to 588/9
- Class ‘F’ insulation for all frames
- Class ‘H’ resin insulation system
- Temperature rise: Class ‘B’ (80°C)
- NEMA Design ‘B'
- Most ratings meet Design C Torque
- Service factor:
- 1.25 up to 100HP
- 1.15 from 125HP & up
- Continuous duty (S1)
- NPT threaded terminal box
- F2 mount
- Color: RAL 5009
- Stainless steel nameplate AISI 316 with laser etching
- MGI Part 31 rating for use with VFD - 1000:1 Variable Torque speed range
Specifications
| Phase | Three Phase |
| Frame | 182/4T |
| Output | 2 HP |
| Poles | 06 |
| Frequency | 60 Hz |
| Rated speed | 1170 rpm |
| Slip | 2.50 % |
| Full Voltage - No Cables | 208-230/460//380 V |
| Rated Current | 7.13-6.44/3.22 A |
| LR Amperes | 53.5-48.3/24.2 A |
| LRC | 7.5x(Code L) |
| No Load Current | 3.28-3.80/1.90 A |
| Rated Torque | 8.98 ft.lb |
| Locked Rotor Torque | 300 % |
| Breakdown Torque | 350 % |
| Insulation Class | F |
| Service Factor | 1.25 |
| Moment of Inertia | 0.6210 sq.ft.lb |
| Design | B |
| Locked Rotor Time | 55s (cold) 31s (hot) |
| Temperature Rise | 80 K |
| Duty Cycle | S1 |
| Maximum Room Temperature | 40 °C |
| Minimum Room Temperature | -20 °C |
| Degree of Protection | IP55 |
| Altitude | 1000 m |
| Cooling Method | TEAO Totally Enclosed Air Over |
| Mounting | F-1 |
| Rotation Direction | Both |
| Noise Level | 52.0 dB(A) |
| Starting Method | Direct |
| Enclosure Material | Iron |
| Front Bearing Shielding | 2RS |
| Front Bearing Size | 6207 |
| Front Bearing Type | Ball |
| Front Sealing Type | V Ring |
| Rear Bearing Shielding | 2RS |
| Rear Bearing Size | 6206 |
| Rear Bearing Type | Ball |
| Rear Sealing Type | No Rear Sealing |
| Grease Type | Mobil Polyrex EM |
| VFD Turndown VT | 1000:1 |
| VFD Turndown CT | 20:1 |
