IC330-180L-22-AD130, Contactor, 180A, 3 Pole, Aux: 2NO/2NC, Coil: 110-130VAC/DC
FMX Contactor, 180A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 110-130VAC/DC
Weight: 9.74 lbs.Made in: Brazil
IC330-180L-22-AD130, Contactor, 180A, 3 Pole, Aux: 2NO/2NC, Coil: 110-130VAC/DC
FMX Contactor, 180A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 110-130VAC/DC
Weight: 9.74 lbs.Made in: Brazil
Specifications
FMX Contactor, 180A, 3 Pole, Lug Terminals, 600V, Aux: 2NO/2NC, Coil: 110-130VAC/DC
- 3/4HP to 75HP
- DIN-rail mountable up to 105A frame
- UL508 Listed
- UL and CE Certified
- IEC 60947
- 1 year warranty
UL HP Ratings (AC3 Motor Load)
| Three Phase | |
| 200V | 60HP (177A) |
| 230V | 75HP (192A) |
| 460V | 150HP (180A) |
| 575V | 200HP (192A) |
| Optional Overload Relay | IOL-180L |
General Specifications
| Contactor Frame Size | 180A |
| Rated Insulation Voltage | UL/CSA: 600V IEC/VDE 0660: 1000V |
| Rated Impulse Voltage IEC60947-1 | 8kV |
| Degree of Protection | Main Terminals: IP00 Coil Terminals: IP20 Auxiliary Terminals: IP20 |
| Rated Operating Frequency | 25 to 400 Hz |
| Vibration Resistance (5 to 200Hz) | Contactor Open: 4g Contactor Closed at Coil: 4g |
| Mechanical Endurance | 10,000,000 Operations |
| Electrical Endurance (AC-3) | 1,000,000 Operations |
| Shock Resistance (1/2 Sine Wave = 11ms) | Contactor Open: 3g Contactor Closed at Coil: 3g |
| SCCR | 5kA |
| Busbar (width x thickness) | 20 x 3mm |
| Power Terminals Screw Driver | M8 Hex |
| Tightening Torque | 123.9 to 141.6 lb-in |
| Environmental Conditions | Ambient Storage Temperature: -67° to 176°F (-55° to 80°C) Operating Ambient Temperature : -13° to 131°F (-25° to 55°C) Climatic Withstand: According to IEC 60680-2 Pollution Degree: 3 Mounting: Screw to Panel |
| Dimensions | 6.3" H x 4.8" W x 5.7"D (160mm H x 121.5mm W x 145mm D) |
| Weight | 11 lbs |
| Warranty | 1.5 years |
Control Circuit Ratings
| AC (50/60Hz) /DC Coil Voltage Class | 110 to 130V |
| Voltage Range | 88 to 143VAC/DC |
| Coil Operating Limits | Pick-up: 66 to 97.5VAC/DC Drop-out: 44 to 78VAC/DC |
| Coil Consumption (Single Coils) | Sealed:21.5VA (AC) / 12.5W (DC) Inrush:426VA (AC) / 375W (DC) |
| Heat Loss | 5.8W |
| Power Factor | Sealed: 0.27 Cosɸ Inrush: 0.68 Cosɸ |
| Operating Time | Coil Energization-N.O. : 40 to 70ms Coil De-energization-N.O. : 55 to 75ms |
