IC330-105S-00-AC120, Contactor, 105A, 3 Pole, Coil: 110/120VAC
FMX Contactor, 105A, 3 Pole, 600V, Screw Clamp Terminals, Coil: 110/120VAC, 50/60Hz
Weight: 3.15 lbs.Made in: Brazil
IC330-105S-00-AC120, Contactor, 105A, 3 Pole, Coil: 110/120VAC
FMX Contactor, 105A, 3 Pole, 600V, Screw Clamp Terminals, Coil: 110/120VAC, 50/60Hz
Weight: 3.15 lbs.Made in: Brazil
Specifications
FMX Contactor, 105A, 3 Pole, 600V, Screw Clamp Terminals, Coil: 110/120VAC, 50/60Hz
- 3/4HP to 75HP
- DIN-rail mountable up to 105A frame
- UL508 Listed
- UL and CE Certified
- IEC 60947
- 1 year warranty
UL HP Ratings (AC3 Motor Load)
| Single Phase | |
| 115V | 10HP (100A) |
| 230V | 20HP (88A) |
| Three Phase | |
| 200V | 30HP(92A) |
| 230V | 40HP (104A) |
| 460V | 75HP (96A) |
| 575V | 75HP (77A) |
| Optional Overload Relay | IOL-105S |
General Specifications
| Contactor Frame Size | 105A |
| Rated Insulation Voltage | UL/CSA: 600V IEC/VDE 0660: 1000V |
| Rated Impulse Voltage IEC60947-1 | 8kV |
| Degree of Protection | Main Terminals: IP10 Coil Terminals: IP20 Auxiliary Terminals: IP20 |
| Rated Operating Frequency | 25 to 400 Hz |
| Vibration Resistance (5 to 200Hz) | Contactor Open: 5g Contactor Closed at Coil: 7g |
| Mechanical Endurance | 10,000,000 Operations |
| Electrical Endurance (AC-3) | 1,100,000 Operations |
| Shock Resistance (1/2 Sine Wave = 11ms) | Contactor Open: 6g Contactor Closed at Coil: 10g |
| SCCR | 5kA |
| Terminal Capacity (UL /CSA) | Stranded / Solid: 10 - 1/0AWG |
| Power Terminals Screw Driver | 4mm Allen |
| Tightening Torque | 60 lb-in |
| Environmental Conditions | Ambient Storage Temperature: -67° to 176°F (-55° to 80°C) Operating Ambient Temperature : -13° to 131°F (-25° to 55°C) Climatic Withstand: According to IEC 60680-2 Pollution Degree: 3 Mounting: 35mm DIN-rail Acc. DIN EN50 022 |
| Dimensions | 4.58" H x 2.97" W x 4.97"D (116.3mm H x 75.4mm W x 126.2mm D) |
| Weight | 3.32 lbs |
| Warranty | 1.5 years |
Control Circuit Ratings
| AC Coil Voltage Class | 120VAC (60Hz) 110VAC (50Hz) |
| Voltage Range | 120VAC (60Hz) : 96 to 132VAC 110VAC (50Hz) : 88 to 121VAC |
| Coil Operating Limits | 120VAC Pick-up : 60 to 91.2VAC (60Hz) 110VAC Pick-up : 55 to 83.6VAC (50Hz) 120VAC Drop-out: 30 to 72VAC (60Hz) 110VAC Drop-out: 27.5 to 66VAC (50Hz) |
| Coil Consumption (Single Coils) | Sealed: 16.8 to 25VA Inrush: 295VA |
| Heat Loss | 8.0W |
| Power Factor | Sealed: 0.32 Cosɸ Inrush: 0.54 Cosɸ |
| Operating Time | Coil Energization-N.O. : 10 to 30ms Coil De-energization-N.O. : 9 to 15ms |
