48.52.8.120.0060, Interface Relay Module, 8A DPDT, 120V AC Coil, with LED indicator and protective module
Finder Electromechanical Interface Relay Module, 8A DPDT, 120V AC Coil, with LED indicator and protective module
Weight: 0.2 lbs.Made in: Italy
48.52.8.120.0060, Interface Relay Module, 8A DPDT, 120V AC Coil, with LED indicator and protective module
Finder Electromechanical Interface Relay Module, 8A DPDT, 120V AC Coil, with LED indicator and protective module
Weight: 0.2 lbs.Made in: Italy
Specifications
Finder Electromechanical Interface Relay Module, 8A DPDT, 120V AC Coil, with LED indicator and protective module
GENERAL SPECIFICATIONS
| Configuration | 2CO (DPDT) |
| Contact Rating | 8A at 250VAC 8A at 30VDC |
| Rated Load AC1 | 2,000VA |
| Rated Load AC15 (230VAC) | 400VA |
| Single Phase Motor Rating (230VAC) | 0.3kW |
| Breaking Capacity DC1 | 30V : 8A 110V : 0.3A 220V: 0.12A |
| Minimum Switching Load | 300mW (5V/5mA) |
| Coil Nominal Voltage | 120VAC |
| Coil Consumption | 11.8mA |
| Coil Rated Power | 1.2VA (50Hz) |
| Coil Voltage Operating Range | 96 to 132VAC |
| Coil Holding Voltage | 96VAC |
| Coil Must Drop-out Voltage | 24VAC |
| Mechanical Life | 10,000,000 |
| Electrical Life at Rated AC1 Load | 200,000 |
| Operate / Release Time | 7ms / 4ms |
| Terminal Connection Type | Screw Terminal |
| Insulation between Coil and Contacts (1.2/50µs) | 6kV (8mm) |
| Dielectric Strength Between Open Contacts | 1,000VAC |
| Ambient Temperature | -40° to 158°F (-40 to 70°C) |
| Environmental Protection | IP20 |
