Knowledge base

TitleSummaryRelated Links
AN-GEN-004

Determining Motor Full Load Amps (FLA)

How to determine your motor’s FLA.
AN-TD2-001

TD200 PID Quick Start

How to setup PID control for TD200 series AC drives.
AN-TD2-002

FM50 Series to TD200 Series Model Number and Parameter Cross Reference

Cross reference charts for FM50 series to TD200 series AC drives.
AN-TD2-003

TD200 Series Frequency Source Selection

How to set the Frequency Source for TD200 series AC drives.
AN-TD2-004

TD200 Series Run Command Source Selection

How to set the Run Command Source for TD200 series AC drives
AN-TD2-005

TD200 Series Emergency Stop

How to setup a digital input on the TD200 series AC drive as an Emergency Stop
AN-TD2-006

TD200 Series Forward and Reverse Jog

How to setup the TD200 to use Jog controls
AN-TD2-007

TD200 Series Analog Output Setup

How to setup the Analog Output on TD200 series AC drives
AN-TD2-008

TD200 Series Motor Rotation Direction Check

How to check the Motor Rotation Direction for Accuracy
AN-TD2-009

Wiring Devices Using External Power Supply

How to wire externally powered devices to the TD200 input terminals.
AN-TD2-010

Using a Panel Meter with TD200

How to use a panel meter and potentiometer to provide external speed display and control with the TD200