|AN-SG2-001||AN-SG2-001 - SG2 Software Download|
This application note will explain how to download the SG2 software from the FactoryMation website and how to set-up software on a computer using Windows 7 operating system..
|AN-SG2-002||AN-SG2-002 - Uninstalling SG2 Software|
This App Note will show how to uninstall SG2 software using Windows 7 operating system
|AN-SG2-003||AN-SG2-003 - Opening and Linking SG2 Software to SG2 unit|
In this App Note, we will be opening a new SG2 program and linking the SG2 software to the SG2 Programmable Logic Relay
|AN-SG2-004||AN-SG2-004 - Creating and Loading an SG2 Program|
In this App Note, we will be creating an SG2 program and then loading the program into an SG2 Programmable Logic Relay
|AN-SG2-005||AN-SG2-005 - Simulating SG2 program using the SG2 Software|
Simulating SG2 program using the SG2 Software
|AN-SG2-006||AN-SG2-006 - Defining the Ladder Logic Tool Bar|
Defining the Ladder Logic Tool Bar for the SG2 Client Software
|AN-SG2-007||AN-SG2-007 - Upload/Download an SG2 Program|
Upload/Download an existing SG2 Program
|AN-SG2-008||AN-SG2-008 - SG2 Ladder Structure for 3 Contact Program|
We will define the basic structure of a Ladder Logic program
|AN-SG2-009||AN-SG2-009 - Digital Inputs (AC/DC)|
Discuss the proper types of input sources for each type of digital input, and we will identify both AC and DC inputs
|AN-SG2-010||AN-SG2-010 - Output Types (hardware and software)|
Discuss the different Hardware Output options for the SG2 Programmable Logic Relay (Relay or Transistor), also, the Software Output Types (General, Set, Reset, and Pulse)
|AN-SG2-011||AN-SG2-011 - Compatible Sensor Types|
Give examples of the sensor types that are compatible for use with the SG2 Programmable Logic Relay
|AN-SG2-012||AN-SG2-012 - Analog Inputs for the SG2 Base Unit|
We will show the Analog Input capabilities of the SG2 Base units
|AN-SG2-013||AN-SG2-013 - Explaining Auxiliary Relay contact/coil options|
We will define the auxiliary relay contact/coil options...
|AN-SG2-014||AN-SG2-014 - SG2 Timer Instructions|
We will show how to use a Timer Instruction..
|AN-SG2-015||AN-SG2-015 - SG2 Counter Instructions|
A Counter Instruction will be used to monitor an input and activate an output coil after a certain number of events..
|AN-SG2-017||AN-SG2-017 - Differential (One Shot) Instructions|
We will demonstrate how to use both the rising edge and falling edge Differential (One Shot) instruction..
|AN-SG2-018||AN-SG2-018 - Timer Instruction Modes|
Timer Instruction modes, definitions, and common inputs will be reviewed